

Timber
This product, produced from Scotch Pine, Spruce or Larch trees, is a high quality, dried, fabricated production. You can see our AB-C quality ready-to-use timber dimensions from the table below.
AB Quality Characteristics
Clean and Healthy Knot Diameter: Between 1 and 4 cm.
Clean and Healthy Knot: 3 in 1 meter.
Open Knot: Exists
Closed Knot: Not exists
Unsound Knot: Not exists
Capillary Crack: Not exists
Greening: Very Rare For Seasonal Reasons.
Resin: Not exists
Decay: Not exists
C Quality Characteristics
Clean and Healthy Knot Diameter: Between 1 and 6 cm.
Clean and Healthy Knot: 3 in 1 meter.
Open Knot: Exists
Closed Knot: Exists (Due to the reduction of humidity to 10% during drying, unhealthy knots have been removed. There is no knot drop during and after the application.)
Unsound Knot: Not exists
Capillary Crack: It can be up to 10% of the length of the board.
Greening: Very Rare For Seasonal Reasons.
Resin: May be found
Decay: Not exists
Our Commercial Representatives are available for you through our communication channels between 09:00 – 18:00 on weekdays and Saturdays.
Quality and Dimensions
Kiln-dried Wiped Lumber | AB-C Quality | (40X96) X3-4-5-6 |
Kiln-dried Wiped Lumber | AB-C Quality | (40X146) X3-4-5-6 |
Kiln-dried Wiped Lumber | AB-C Quality | (40X196) X3-4-5-6 |
Kiln-dried Wiped Lumber | AB-C Quality | ( 58X146) X3-4-5-6 |
Kiln-dried Wiped Lumber | AB-C Quality | ( 9×9 ) X3-4-5-6 |
Kiln-dried Sawn Timber | AB-C Quality | All Dimensions |